PTA-8955 is a Box for Network TV and surveillance. It uses a high-performance H.264 video compression chipset, requires smaller bandwidth and implements better video quality. P2P server and UPnP protocol make an easy network connection, you can get rid of complex network configuring and just use it by plug-n-play. With the application software installed on your computer, 3G mobile phone or Wi-Fi PDA, you could remotely watch TV programs & record TV programs & monitor home situation on the go.

*Features

* Have the function of selecting channels and surveillance, you can connect to it anytime、anywhere of the world.
* No monthly fee, take use of the existing home TV signal with the bandwidth network directly.
* P2P server and UPnP protocol make an easy network connection, so you can get rid of complex network configuring and just use it by plug-n-play.
* H.264 hardware compression, intelligent detecting video and automatic adjusting bitrate ensure smooth video stream transport on the network just need 256k bandwidth.
* Watching TV program and monitoring with 3G mobile phone or notebook on the go.
* Powerful PVR and scheduling recording, you can set the schedule recording task remotely without opening computer.
* There are AV and S inputs, through the IR remote control learning, you can watch and control different kinds of video devices in home remotely.
* DHCP/Static IP/PPPoE protocol supported, Static IP、DHCP and Cable modem all can be used.
* Remote firmware update supported, you can spend no money to upgrade new function.
* Username and password setting for users of different levels to differentiate use privilege.
* No limit to the login number, more people can watch TV and monitor from different computers that have been installed on (up to 5 people).
* There is one port monitoring for camera input, supporting displacement detecting and alarm for video lost.
* Internal built RF model group, you can control home appliances and light remotely.
* PTZ camera control supported through Internal built one group alarm input, one group alarm output and one group RS-485 interface.
* Alarm output can select to sent message to remote devices such as E-mail、FTP、Phone message or local recording.



*Specifications

Hardware

* 32-bit RISC Dual-Core(ARM 9+DSP)
* Memory: 16MB FLASH，32MB SDRAM
* Operating System: Embedded Linux
* Power Supply: 5V DC, 2A
* Network Interface: 10/100 Base-T Ethernet
* Network Protocol: HTTP,UDP, TCP/IP,SMTP, FTP, NTP PPPoE, DHCP, DDNS, UPnP, RTSP

Audio/Video

* Supported TV Standards: NTSC & PAL
* Video Compression: H.264(hardware compression)
* Frame: UP to 30fps(NTSC)/ 25fps(PAL)
* Bitrate: 64K~4Mbps
* Audio Compression: AAC /G.726(For Security)
* Recording format: MP4/ASF (For Security)
* Resolution: D1(720x480)、Half D1(720x240)、CIF(352x240)、QCIF(176x128)



Input/Output

* Two TV signal ports (input/output IEC 169-2)
* One 9pin Mini-DIN Audio/Video input.
* One audio input connector (Pink: 3.5mm,Phone Jack)
* One audio output connector(green: 3.5mm,Phone Jack)
* One GPIO connector (DIx1,DOx1,RS-485x1 PELCO D)
* One camera input connector(BNC, Female)
* One RESET key to restore to the factory setting.
* One RJ-45 Ethernet interface, including 2 leds (Power/Status)
* One power input connector.
* Two IR Cable control connector (Receive/Send one each)
* Two USB connectors to connect the external storage and PC-09B

Experiment and Environment:

* Dimension: 185*124*28.5 mm
* Weight: 305g (Box itself)
* Operating temperature: 0°C ~ 45°C
* Operating Humidity: 20%~80% (Non-condensing)

规格图友善列印